• logo
  • EN
di-soric
  1. Home
  2. Bookmarks

Products that can be ordered directly online (22):

Product
Product:
Sensor accessories
RL 42x35
Art.-No.: 203570
Choice:
Description:
For laser-light - Heat-resistant up to 60 °C - Hole Ø3.3 mm (2x) - Suitable for polarized light
Product:
BE-B Barlights
BE-A30/30-G1-K-BS
Art.-No.: 209741
Choice:
Description:
High light intensity - A minimal edge region - Homogeneous luminous field - Very compact design - High protection type IP 67 - Robust design
Product:
Capacitive proximity sensors
KNS-M18/85V-B08PS-B4
Art.-No.: 215242
Choice:
Description:
Increased voltage range of 10 ... 40 V DC - Temperature-resistant sensor surface up to 120°C - Metal casing - PEEK surface, resistant to abrasive substances
Product:
Lighting for machine vision
BEK-D70-G2TI-K-BS
Art.-No.: 207441
Choice:
Description:
To detect the finest changes in surface - Constant level of light intensity over the entire voltage range - Homogeneous illumination - Protection class IP 67 - Low levels of heat produced - External trigger input - High efficiency - Light intensity can be adjusted - Sturdy housing design
Product:
CS-Z accessories for vision sensors
LC-P-4614
Art.-No.: 214823
Choice:
Description:
Safety screen IP 67 - Polarizer for lens - Polarizer for lighting
Product:
Fork light barriers
OGU 051 G3-T3
Art.-No.: 210244
Choice:
Description:
4 operating modes as an IO-Link parameter - Switch-on/off delay as an IO-Link parameter - Diagnostics with IO-Link - Metal casing - Sensitivity is adjustable - High switching frequency - Light/dark switching - Bright ring LED - High protection type
Product:
Magnetic field sensors
MZEC 9-18 PSL-K-TSS
Art.-No.: 204657
Choice:
Description:
For pneumatic cylinders with round groove 3.7 mm - For pneumatic cylinders with round groove 4 mm - To be inserted from above - Compact design - Completely electronic, vibration-resistant - High reproducibility - Accessories available for mounting on round, tie rod and profile cylinders
Product:
Signal preparation
TKHM-Z/TSM-Z/T4
Art.-No.: 209541
Choice:
Description:
Suitable for all standard sensors - Compact design - Can be retrofitted quickly and easily - High temperature use range - LED display for status and switching output
Product:
Light curtains
LI 160-5-795-830 T
Art.-No.: 207855
Choice:
Description:
With evaluation electronics LVE ... / LVX ... measuring and switching - With evaluation electronics LVB ... switching - Beam evaluation horizontal or diagonal - Compact design - Aluminum housing - Easy to install
Product:
Sensor accessories
WRB 120 S-SG-M6x30-2.5
Art.-No.: 203614
Choice:
Description:
For operating color sensors with fiber optic connection - High-quality glass fibers - Arrangement of fibers statistically mixed - Resistant to high temperatures - Robust, highly flexible
Product:
Clamping bracket
HS-BW-CS5X-ID5X0-12
Art.-No.: 215661
Choice:
Description:
Complete set - Direct mounting on the mounting rod of the clamping cylinder mounting system - Adjustment range: 360° rotation - Top or bottom mounting on CS5x/ID5x0
Product:
Vision sensors
CS62-BM38-EP15/500ID/OCR
Art.-No.: 215216
Choice:
Description:
Localization, parts detection, counting, measuring, reading codes and plain text, smart camera image processing - The specialist, compact and high-performance - High power LED illumination in red and white - Flexible and productive Software nVision-i - Parameter changes via linked Profinet inputs during execution - Simple & intuitive parameterization - Flexible working distances of 50 - 2,000 mm by changing lenses
Product:
Capacitive proximity sensors
KNS M8M 03N G3-T3
Art.-No.: 209757
Choice:
Description:
Large operating distance - Detection of liquids, powdery and solid materials - Detecting metal and non-metal parts - Detection possible even through containers and packaging - Sensitivity is adjustable via multi-turn potentiometer - NO/NC, switchable - Push-pull output pnp + npn - Stainless steel housing
Product:
Lighting for machine vision
BEK 1-D120-G1TI-IBS
Art.-No.: 204984
Choice:
Description:
To detect the finest changes in surface - Constant level of light intensity over the entire voltage range - Homogeneous illumination - Protection class IP 67 - Low levels of heat produced - External trigger input - High efficiency - Light intensity can be adjusted - Sturdy housing design
Product:
Magnetic field sensors
MZEC 3.7 PS-K-TSSL
Art.-No.: 201127
Choice:
Description:
For pneumatic cylinders with round groove 3.7 mm - Short design - Mounting element made of stainless steel - Highly flexible cable - Fully electronic - Molded electronic circuitry - High reproducibility - High protection type
Product:
Signal preparation
BS-Z-8-UND
Art.-No.: 203682
Choice:
Description:
High protection type IP 67 - Compact design - Metal thread - Plastic housing
Product:
Machine lighting
MB-N-251-K-B3
Art.-No.: 210196
Choice:
Description:
High light intensity thanks to state-of-the art Power LEDs - Very good color reproduction guarantees safety at the workplace (color rendering index 85) - Long life thanks to intelligent thermal management - High-performance LEDs with very high light intensity ensure reliable and even illumination - High protection type IP 67 - Trigger input for external control - Dimmable via PWM signal - Magnetic holder set available as an option - Adjustable mounting angle optionally available - Pluggable diffusion filter optionally available
Product:
Inductive ring sensors
IRSD-25P-G3-B4
Art.-No.: 213791
Choice:
Description:
High resolution - Short response time - Sensitivity and pulse stretching adjustable - Resistant to dirt - Switchable between static and dynamic operating principle - Metal connector - High protection type - Frequency switchable for reducing the installation distance - Intelligent teach-in process - Local and Remote can be set
Product:
Inductive tube sensors
ISDP 70 NSLK-K-BS
Art.-No.: 204307
Choice:
Description:
Standard sensitivity - Dynamic operating principle - Automatic hiding of metallic contamination - Compact design - Low weight - Cable with plug connector M12 - Slot for quick mounting - Cable tie contained in scope of delivery
Product:
Connection technology
VKHM-Z-15/4
Art.-No.: 203643
Choice:
Description:
Drag chain compatible - Sturdy metal union nut - Durable PU coating - Flexible lead design - Good stripping properties - High protection type - Gold-plated plug-in contacts
Product:
Signal preparation
TKHM-Z/TSM-Z/U
Art.-No.: 202851
Choice:
Description:
Suitable for all standard sensors - Compact design - Can be retrofitted quickly and easily - High temperature use range - LED display for status and switching output
Product:
Lighting for machine vision
BEK 1-D120-G0TI-IBS
Art.-No.: 204983
Choice:
Description:
To detect the finest changes in surface - Constant level of light intensity over the entire voltage range - Homogeneous illumination - Protection class IP 67 - Low levels of heat produced - External trigger input - High efficiency - Light intensity can be adjusted - Sturdy housing design

×

The article is now on the bookmarks

×

"传感器附件" 已经被加入 "报价". 连结至 "报价"